JKWF series Hybrid reactive power compensation controller integrates the functions of Monitoring grid ,harmonic protection, compensation and fault warning,The series can be used in three-phase unbalanced load compensation system, suitable for AC 0.4kV, 50Hz low-voltage power distribution system monitoring and reactive power compensation control.JKWF-18F is a special type of welding machine.
Voltage,current,fact,active power,reactive power
frequency,THDi ,THDu
3rd-13th HRi,HRu
Over voltage,under voltage,high harmonic rate protection and alarm
Outputs will be Auto reset,when power on system
Auto lock when sample current is below 0.1A
Data protection after power off
型號 |
補償方式 |
基本參數測量 |
保護功能 |
輸出路數/接點 |
適配投切開關 |
通訊接口及方式 |
JKWF-12D /16D/18E /18F/24F |
混合補償 (單相分補+三相共補) |
電壓/電流/功率因數/有功/無功功率等;電容器投切狀態;電壓總諧波畸變率、電流總諧波畸變率,系統頻率, 三相3-13次電壓、電流畸變率(18E/18F/24F型) |
過壓保護 欠壓保護 缺相保護 諧波保護 |
12路、16路 有源接點 DC12V 60mA/路 18路、24路 有源接點 DC12V 40mA/路 |
抗諧波開關 調節器開關 復合開關 可控硅模塊 |
RS485 |